xTool 中古品/修復済み製品ポリシー
xToolの中古品/修復済み品は、依然として正常に動作し、夢の創造者やDIY愛好者に無限のアイデアを提供します。これらを最大限に活用し、炭素排出量を削減し🌿、どんな予算でもあなたのDIYの夢✨をサポートするために、xToolはこれらを検査し、中古品/修復済み品を販売しました。お手元に届く際には、厳格な再生プロセスを経ていることを確認しています。
完全に機能する製品で大幅な節約
整備済み製品が販売前に完全に機能することを確認し、楽しい割引(最大 65% オフ)を提供します。
品質保証
12 か月の保証ポリシーをお楽しみください。
迅速で無料配送
日本倉庫から配送いたし、普通には1-3営業日に配達。最速翌日配達可能。
より良いソフトウェアをあなたのサービスに
成熟した彫刻ソフトウェアLightBurnと互換性あり
一般的なレーザーカッター用のレイアウト、編集、および制御ソフトウェアです。彫刻ファイル形式は、NC、BMP、JPG、PNG、DXFなどに対応しています。
購入前に知っておくべきこと
▸ 各 xTool の良好な再生製品:
- 全機能のテストを受け、欠陥のあるモジュールはすべて交換されます。
- 徹底的な清掃と検査プロセスを経ます。
- 適切なマニュアルや部品を含む再包装が行われます。
- 新品のxTool製品と同じ基本的なテスト手順を経て、同じ技術ガイドラインに基づいて評価されます。
- 一部の再生品にはわずかな使用痕がある場合がありますが、これは機械の正常な機能には影響しません。そのような理由での返品要求は受け付けられません。
xToolの新品製品の保証ポリシーが、xToolの良質な再生製品にも適用されます。(ただし、再生製品は新品ではなく再生製品とのみ交換が可能です)。
▸ 返品および返金ポリシー
- あなたのパッケージがまだ出荷されていない場合: この場合、12時間以内に注文キャンセルのリクエストをメール(support.jp@xtool.com)で送信してください。これが最も迅速に返金を受ける方法です
- あなたのパッケージが発送途中の場合: この場合、できるだけ早くメール(support.jp@xtool.com)でパッケージのインターセプト(途中止め)のリクエストを送信してください。購入価格の返金を受け取れますが、インターセプト費用や追加の関税などのコストをお支払いいただきます。返品送料は返金不可です。パッケージインターセプトの費用はお客様の負担となります。
- あなたのパッケージが受け取られた場合: パッケージが確認され、署名された後は、現在のxTool公式ストアの返品/返金ポリシーを利用することはできません。ただし、交換ポリシーは有効です。ただし、再生品は新品ではなく再生品とのみ交換が可能です。このポリシーに同意いただければ、返金が処理されます。PS: 上記で言及したサービス料の割合は、税金や送料を含む商品総額に基づいています。
このポリシーに同意いただければ、返金が処理されます。PS: 上記で言及したサービス料の割合は、税金や送料を含む商品総額に基づいています。
製品仕様
/ | Refurbish D1 Pro 20W | Refurbished D1 10W |
---|---|---|
Engraving Accuracy | 0.08*0.10 mm | 0.08*0.08 mm 👍 |
Cutting Ability | One-cut 10 mm basswood 👍 | One-cut 8 mm basswood |
Routing Speed | 400 mm/s 👍 | 160 mm/s |
Operating System | Windows / macOS / iPadOS 👍 | Windows / macOS |
Software | Lightburn / XCS 👍 | Lightburn |
Working Area | 430*390 mm (16.93*15.35 inch) | 432*406 mm(17*16 inch) |
Materials | Diode Laser: Paper, Wood, Leather, MDF, Felt, Some dark opaque acrylic Diode Laser: Paper, Wood, Leather, MDF, Stainless steel, Some dark opaque acrylic, Bamboo, Fabric, Dark glass, Ceramic, Jade, Marble, Shale, Cement, Brick, Plated metal, Painted metal | Diode Laser: Paper, Wood, Leather, MDF, Felt, Some dark opaque acrylic Diode Laser: Paper, Wood, Leather, MDF, Stainless steel, Some dark opaque acrylic, Bamboo, Fabric, Dark glass, Ceramic, Jade, Marble, Shale, Cement, Brick, Plated metal, Painted metal |
Price | Start at $599 | Start at $359 👍 |
Table header 0 | 中古品/修復済み D1 Pro 20W | 中古品/修復済み D1 Pro 10W | 中古品/修復済み D1 Pro 5W |
---|---|---|---|
彫刻精度 | 0.08*0.10mm | 0.08*0.06 mm 👍 | 0.06*0.06mm 👍 |
切断能力 | ワンカット10mmバスウッド👍 | ワンカット6mmバスウッド | ワンカット3mmバスウッド |
ルーティング速度 | 400 mm/s | 400 mm/s | 400 mm/s |
OS | Windows / macOS / iPadOS | Windows / macOS | Windows / macOS |
ソフトウェア | Lightburn / XCS | Lightburn / XCS | Lightburn / XCS |
作業エリア | 430*390 mm | 430*400mm | 430*400mm |
マテリアル | ダイオードレーザー: 紙、木、革、MDF、フェルト、一部の暗い不透明アクリル ダイオードレーザー: 紙、木材、皮革、MDF、ステンレス鋼、一部の暗い不透明アクリル、竹、布地、ダークガラス、セラミック、ヒスイ、大理石、頁岩、セメント、レンガ、メッキ金属、塗装金属 | ダイオードレーザー: 紙、木、革、MDF、フェルト、一部の暗い不透明アクリル ダイオードレーザー: 紙、木材、革、MDF、ステンレス鋼、一部の暗い不透明アクリル、竹、布地、濃い色のガラス、セラミック、翡翠、大理石、頁岩、セメント、レンガ、メッキ金属、塗装金属 | ダイオードレーザー: 紙、木、革、MDF、フェルト、一部の暗い不透明アクリル ダイオードレーザー: 紙、木材、革、MDF、ステンレス鋼、一部の暗い不透明アクリル、竹、布地、濃い色のガラス、セラミック、翡翠、大理石、頁岩、セメント、レンガ、メッキ金属、塗装金属 |
パーツリスト
▸ 中古品/修復済みD1 Pro
▸ Refurbished D1 10W
High Accuracy Cutting & Engraving
Adopted industrial grade structural design, the movement accuracy of xTool D1 can incredibly reach 0.01mm. With 0.08*0.08mm ultra-fine compressed laser spot, always show the best details whether engraving or cutting.
Industrial Grade ALL-STEEL Wheel & Shaft
Different from the plastic steel of other laser machines, the ALL-STEEL wheel & shaft allow xTool D1 to work with a higher precision of 0.01mm. In addition, it supports more than 100,000+ times of sliding and has a lifetime 3 times longer than that of the plastic wheel.
Tension Wheel & Synchronous Belt
By tightening the synchronous belt with the tension wheel adjuster, the movement gap is well eliminated, the machine vibration is reduced and the movement stability is improved, so that the engraving remains accurate even at high processing speeds.
* xTool is the first brand in its class to use closed belts, which avoids the trouble of re-installation after the belt is loosened.
Engraving Fine Vector Graphics
Moderate tension of the synchronous belt is essential to the accuracy of the movement. The tension wheel & synchronous belt allow the D1 to engrave fine vector graphics at high-speed.
0.02mm Repeat Positioning Accuracy
The sturdy structure design makes D1 more stable, and the repeat positioning accuracy is less than 0.02mm. It maintains a perfect engraving effect even after long-term use.
Better Laser Enhances Cutting & Engraving Effect
Use innovative dual laser technology to combine two laser beams into one spot. The compressed spot has higher power, higher cutting ability, faster speed and better effect under the same electric power. The power of 10W dual laser xTool D1 is equivalent to a single laser 15W laser cutting machine.
Wood & Acrylic Cutting(One-PASS)
Explore The Beauty of Acrylic
* Limited by the characteristics of the material itself, the semiconductor laser (blue laser) can only cut dark acrylic materials.
Directly Engrave Stainless Steel Metal
No coating needed Faster speed Darker engraved pattern